Our of production and unavailable for several years, eBearing's Rare Bearings is proud to reintroduce the 1988 Pontiac Fiero front hub and bearing assembly.

 

Manufactured in the U.S.A., in a QS9000, ISO9000 factory with the same quality certifications and audits as OEM hub units. The internal bearings are OEM units. The company producing these hubs for eBearing is the United States' premier and largest manufacturer of aftermarket hub units.

 

Available from The Fiero Store
or direct from eBearing.com

• Made in USA
• Ball bearing units as per the original
• GM original equipment wheel studs
• Full 1-year warranty from date of purchase

513040
7466939
BR930039
20-39

Available from The Fiero Store
or direct from eBearing.com

 

$ 206.45 each, free UPS shipping
     • click here to order one unit in the online store by credit card
     • click here to order one unit by mail (money order / certified check)

$ 412.90 per pair, free UPS shipping
     • click here to order two units in the online store by credit card
     • click here to order two units by mail (money order / certified check)

 

IMPORTANT NOTE: Credit card orders are shipped and billed by our online store in CCNOW and will show up on your credit card bill as "CCNow", not eBearing.

 

To order more than two units, please email us at sales@eBearing.com for details.

 

For Alaska and Hawaii, please email us at sales@eBearing.com and we will quote your the final cost, including applicable shipping charges. Alaska and Hawaii orders by mail order only.
• click here to print out the Alaska/Hawaii mail order form

 

$ 206.45 each + actual duties + actual tariffs + actual shipping and insurance charges

 

Because bearings are subject to specific export requirements, including varying tariffs and duties to many countries, please email us at sales@eBearing.com with the quantity you want and the exact shipping destination. We will calculate your final cost, including shipping and all applicable tariffs and duties. Your order will not be held up by customs other than for normal processing.

 

Sorry, due to the complexity of the transaction, we cannot offer international sales via credit card. International orders are quoted as paid by certified bank draft, in U.S. dollars.

 

• click here to print out the international mail order form

Always follow published factory service procedures for the 1988 Pontiac Fiero, including all service bulletins and updates.
Carefully clean all mounting surfaces and always use new bolts to hold the hub assembly to the knuckle.
Never use power tools, air wrenches or powered torque wrenches of any kind around wheel bearings or hub assemblies.
Always carefully hand-torque all fasteners to factory specified values.

The Fiero's suspension design predates engineering consideration for wheels, offsets, tires and tire compounds available today. As with any older vehicle, it is very easy to install wheels and tires which produce suspension loads higher than the vehicle was designed to handle. Not only the front wheel bearings could be damaged; the Fiero's rear wheel hub assemblies are a design which dates back to 1980 and should also be considered carefully.

These units may not be suitable for concours. While the original units produced in 1987-1988 had forgings which were only machined on critical surfaces, these units have been fully machined to current practice.

While racing use is not approved and voids all warranties, these are ball bearing hub units with the same overall construction as the original and so are SCCA legal.

Due to the specialized nature of this product and the extremely low production volume, there are necessarily tight restrictions on stock returns.

All returns must have an RMA number preassigned and be shipped freight prepaid. Bearings must be received in as-new condition -- unmarked, never installed, handled or damaged in any way. Units in any other condition will not be accepted for credit. A 30% restocking fee applies to all returns.