advertisement
click to visit Consolidated Bearings
 
  advanced

 
click to visit QA1

The eBearing News
June 18, 2009


SKF USA Headquarters Moves to Towamencin
copyright © 2009 eBearing Inc.

SKF USA (a division of SKF AB, Sweden) is consolidating headquarters and support operations to a new facility on Forty Foot Road in Towamencin, Pennsylvania. Since 1998, SKF USA has been headquartered a very short distance away, in Kulpsville. Prior to that, it was in King of Prussia. SKF has signed a 15-year lease on the Towamencin property.

The property includes a new, state-of-the-art 85,000 square foot 3-story office building. An atrium connects it to an extensively remodeled single-story 35,000 square foot warehouse and multi-purpose facility at the rear. That existing building, much of which was torn down in the renovation process, had been home to Penn Reels which closed down in 2003.


New SKF Towamecin headquarters
New SKF USA Headquarters in Towamencin, PA


Another 6,000 square feet of construction has been pre-approved but not yet built, which would square off the slightly L-shaped former Penn Reels building.

Towamencin not only absorbs the Kulpsville corporate staff, but also consolidates other SKF USA Industrial, Service and Logistics operations from nearby Allentown and Norristown. Over 400 people will populate the facility.

SKF specified that the entire facility be built out "green." The developer said they expect the site to achieve a platinum LEED (Leadership in Energy and Environmental Design) rating, the highest level awarded by the U.S. Green Building Council.

Included in the facility's LEED certification is a $750,000 geothermal system for heating and cooling, employing 112 bore holes, each 500 feet deep. It also uses a high reflectivity roof, energy efficient lighting, small zone heating and air conditioning control, along with locally-sourced materials, FSC certified wood products, low VOC materials, and recycled furnishings where possible. The building's water conservation system uses special fixtures throughout, and even waterless urinals. Green techniques reportedly reduced the construction site waste stream by 82%.

SKF is the first bearing manufacturer to achieve global ISO 14001 certification.

SKF USA's headquarters phone numbers remain the same, as do payment and contact box addresses.

printer-friendly version




Share |

- by Bruce A. Carr
from individual research,
tips and commercial sources.
Bruce Carr edited this content.
Copyrighted material; unauthorized reproduction prohibited.


Return to News Headlines

Have bearing industry news leads ?      Send them to news@eBearing.com


See all the news from :
2010    2009    2008    2007    2006    2005    2004    2003    2002    2001    2000    1999   

eBearing.com ... for everything that moves™
Copyright 1999-2011, eBearing Inc. All rights reserved.
Copyright information is on www.copyright.com
Unauthorized reproduction is prohibited.
eBearing Inc, eBearing.com, and "... for everything that moves" are registered trademarks of eBearing Inc.



click to visit GMN Bearing USA Ltd.

eBearing.com ... for everything that moves™
Entire contents Copyright © 1999-2011, eBearing Inc. All rights reserved.
eBearing.com and "... for everything that moves" are registered trademarks of eBearing Inc.